CM3-U3-50S5C,spinnaker-3.1.0.79,AcquisitionMultipleCamerasWriteToFile

Answered

liwenxiong

• December 20, 2023 08:10
• Edited

Hi,

when I test CM3-U3-50S5C Camera with spinnaker-3.1.0.79 `s test example AcquisitionMultipleCamerasWriteToFile on Ubuntu22.04.3 LTS (Jammy Jellyfish),

found Error: Spinnaker: Failed waiting for EventData on NEW_BUFFER_DATA event. [-1011].

Can you help me?

Such is log:

lwx@u22:/opt/spinnaker/bin$ sudo ./AcquisitionMultipleCamerasWriteToFile

Application build date: Dec 20 2023 15:25:07

Spinnaker library version: 3.1.0.79

Number of cameras detected: 1

Printing device info for camera 0...

*** DEVICE INFORMATION ***

DeviceID : USB\VID_1E10&SRL_016471C1
DeviceSerialNumber : 23359937
DeviceUserID : 
DeviceVendorName : Point Grey Research
DeviceModelName : Chameleon3 CM3-U3-50S5C
DeviceVersion : FW:v1.12.3.00 FPGA:v2.02
DeviceBootloaderVersion : Node not readable
DeviceType : USB3Vision
DeviceDisplayName : Point Grey Research
DeviceAccessStatus : OpenReadWrite
DeviceDriverVersion : none : 0.0.0.0
DeviceIsUpdater : 0
DeviceInstanceId : USB\VID_1E10&SRL_016471C1
DeviceLocation : 
DeviceCurrentSpeed : SuperSpeed
DeviceU3VProtocol : 1
DevicePortId : 
GenICamXMLLocation : Device
GenICamXMLPath : 
GUIXMLLocation : Device
GUIXMLPath : Input.xml

Initializing camera 0...
Creating camera0.tmp...

*** CONFIGURING CAMERAS... ***

Camera[0]: Acquisition mode set to continuous...
Camera[0]: Pixel format set to: EnumEntry_PixelFormat_BayerRG8

*** ACQUIRING AND SAVING IMAGES TO A FILE ***

Camera[0]: Started acquiring images
Error: Spinnaker: Failed waiting for EventData on NEW_BUFFER_DATA event. [-1011]

0

• Official comment

  

  TDY_Ifeanyi

  Community team

  • December 20, 2023 10:19

  

  

  Hello Liwenxiong,

  It seems camera is not capturing image. Hence, reason for spinnaker timeout exception: "Failed waiting for EventData on NEW_BUFFER_DATA event. [-1011]".

  If you do not intend to use camera in trigger mode, I would open spinView and disable it or restore camera back to default user setttings https://www.flir.com/support-center/iis/machine-vision/application-note/saving-custom-settings-on-flir-machine-vision-cameras/.

  Otherwise, I would double check camera is properly configured in Trigger mode and/or camera is receiving required TTL signal from external trigger source.

  Please let us know if the provided information help to resolve this issue.

  Regards,

  Ifeanyi.
• 

  liwenxiong

  • December 21, 2023 01:09

  Hello Ifeanyi,

  when I set trigger mode to off,

  the problem has already been solved.

  Thanks very much,

  Best regards.

  Liwenxiong

  0

Please sign in to leave a comment.