
goekce erguen
- Total activity 17
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 3
- Subscriptions 3
Activity overview
Latest activity by goekce erguen-
goekce erguen commented,
Hi Manuel, Thanks for your reply. To be able to capture Webcams as well, we are currently using 2ndLook. There is a "Trigger Overlap" parameter that can be set as either "off" or "read-out". I gue...
-
goekce erguen created a post,
Calculation of maximum FPS rate with an external trigger
AnsweredHello, I have a question regarding the maximum FPS (frames per second) rate and read-out time for the Grasshopper3 USB3 cameras [GS3-U3-32S4]. We are using 4 cameras and would like to optimize thei...
-
goekce erguen commented,
Hi Markus, sorry I thought I sent you a reply, but now I realized that it was not sent. Yeah, the instructions worked. We can now trigger all other 3 cameras through the master camera. Thanks for y...
-
goekce erguen commented,
Hi Markus, thanks a lot. We will do the changes and let you know the progress.
-
goekce erguen commented,
Hi Manuel, Sure. I've created now a new topic about this question
-
goekce erguen created a post,
Synchronization Grasshopper3 USB3 cameras
AnsweredHi, We would like to capture a recording using 4 Flir Grasshopper3 USB3 cameras(GS3-U3-32S4). For this purpose we developed a synchronization box. We have an issue related to our synchronization ...
-
goekce erguen commented,
Hi Manuel, thanks a lot for your reply. We have an additional question related to our synchronization box. We are able to trigger one secondary camera through master camera, but we cannot trigger ...
-
goekce erguen commented,
Official comment Hi Manuel, Yes, it seems that the problem was related with the power supply. We changed the power cable from PC to PCIe card and also used another computer and the problem is solved. Thank you. B...
-
goekce erguen commented,
Yeah it is true, We don't use GPIO port to power the cameras. so, do you suggest us to use pin 7 to power the cameras externally? Do you think the power supply from Framegraber might be not enough...
-
goekce erguen commented,
Hi Manuel, Thanks for quick reply. Yes, I connected the card to the power supply of PC. Yes we also connect cameras to GPIO power supplies - We developed a synchronization box using this guideli...