Rik
- Total activity 14
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 5
Activity overview
Latest activity by Rik-
Rik commented,
Hello Manuel, thanks for the information.I have 12V available, so I will try that.But that raises an additional question: What if I apply 12V to GPIO pin 1 and the USB cable is connected.Will the c...
-
Rik commented,
Hi Manuel,a workaround would be if the settings could be passed to SpinView as command line parameters.Is that possible (does SpinView accept command line parameters) ? Best regards, Rik
-
Rik created a post,
Spinview: camera settings profile
AnsweredIn Spinview the camera setting can be saved '"Save Camera Settings Profile" button). However I noticed that: 1. The settings of the Recording Window are not saved. 2. Spinview returns to the defau...
-
Rik created a post,
Powering a BFLY-U3-23S6M-C camera via the GPIO pin 1
AnsweredI want to power a BFLY-U3-23S6M-C camera via the GPIO pin 1.The Blackfly U3 Technical Reference (p 24) states that the required voltage is 5V to 24V.Will the power consumption of the camera, and th...
-
Rik created a post,
Powering a BFLY-U3-23S6M-C camera via the GPIO pin 1
AnsweredI want to power a BFLY-U3-23S6M-C camera via the GPIO pin 1.The Blackfly U3 Technical Reference (p 24) states that the required voltage is 5V to 24V.Will the power consumption of the camera, and th...
-
Rik commented,
Hello Manuel, Thank you for the info.But maybe a USB power blocker is the easier way to prevent the camera from being powered via the USB port. Another question: The Blackfly U3 Technical Reference...
-
Rik created a post,
switch off camera
AnsweredI am looking for an easy way to switch of a BFLY-U3-23S6M-C camera (to avoid unnecessary heating of the camera), without removing the USB cable. One option would be to feed it via the 12V GPIO pin ...
-
Rik commented,
Thanks Manuel, I'll try that!
-
Rik commented,
My appologies for jumping into an old topic but I have a similar problem and would like to have a look to the source code examples. However I cannot find the folder "C:\Program Files\FLIR Systems\S...