TDY_William
Community team- Total activity 185
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 83
Comments
Recent activity by TDY_William-
Hi Dan, A couple of things to try: I would double-check and confirm that you are following everything recommended in this other ticket; https://teledynevisionsolutions.zendesk.com/hc/en-us/communi...
-
The Spinnaker SDK comes included with all of our example code. Assuming you did a default, complete installation of the Spinnaker SDK, you can find the examples at C:\Program Files\Teledyne\Spinna...
-
Yes, that is possible. To do so, you would need to use a console application. We have example code, such as the Trigger example, which can be modified to work exactly to your application requireme...
-
Hi Yujin, Just to start off; Triclops, and all of the cameras that support it, are considered legacy products. The older bumblebee cameras are discontinued; https://www.teledynevisionsolutions.com...
-
Hi Stefan, Apologies in the delay of responding to you! Here's a scenario for you; lets say you trigger a camera using an external hardware trigger that is going at 30 hertz. Your camera is curre...
-
Hi Paulo, I would recommend doing the following items (in order): Turn off the PC, and double-check to make sure that the gige host adapter is properly connected to the PC, as it sometimes may tak...
-
Yes, you can clean the glass window on your own, although we would caution that any damage incurred doing so would void the warranty of the camera. However, if you feel comfortable attempting this...
-
Official comment How to do so is explained in two articles we have on the subject. https://www.teledynevisionsolutions.com/en-ca/support/support-center/technical-guidance/iis/using-the-silent-installer-for-the-spin...
-
Official comment Assuming you are using a multi-core system, you can use the Adapter Config GUI to assign a single core to be used solely by the Network Interface Card the camera is connected to. This ensures no o...
-
Hi Adrián, We would not be able to provide assistance regarding third party software issues; we would recommend contacting MathWorks for additional support.